In my latest project i figured I would use a relay for the Tx Rx switching along with a micro controller and a push button that might one day become rf sensing. It works a treat does exactly what its meant to do and I am happy. And then i got to thinking, how much isolation is there between the 2 output poles of the relay. Its not an RF relay just the cheep 5v relay using in arduino projects, so i dont expect it to be great.
So i injected a 27dbm signal into the common of the relay, that about 0.5 watts and measured what was being seen on the isolated pole, 2dbm or about 1.5mw. So i have about 25dbm of isolation and enough power floating on the isolated port to burn your retinas out if you are a double balanced mixer, let alone the 25mw of Rf that’s going to be there when 5W is put thought it, assuming the isolation remains constant with power and im not sure it does, I do not have 5w to stick in there to see atm.
So i looked at the specs of a number of RF Relays, and they are only sporting 40 to 50dbm of isolation, much better but still soul destroying if you are the receiver DBM. So either way I have to find a way to protect the mixer and so im thinking either bidirectional amplifiers or just muting the rf preamp by cutting the power to the transistor. Hooray for me, I now have more thinking to do.
Thanks for reading an hombrewers lament 🙂