Rob’s Receiver Part 3: IF Amp and Xtal Filter

First IF amp and the Xtal filter is build. IF amp is perfect and works exactly as designed. The Xtal filter is a bit rough as you can see from the plots below. It needs to be a bit narrower, closer to 500hz would be nice. Its a bit ripply which is probably due to imperfect terminations and because the xtals are not very well matched, being more like + or – 300hz not 50hz. I have a better frequency counter and a couple hundred more xtals coming slow boat from China, so I should be able to improve things quite a lot when I can measure down to 10’s of hz.

Facebooktwittergoogle_plusredditpinterestlinkedin