Control Board

This is the 2nd time that i have rolled my own control board using the SI5351A. The first one was much simpler than this and had a few other bits on the board. This time around I have gone to town on features that i will incorporate into the firmware. This is why i have used the Mega, i am using just about all the IO pins on offer. 38 pins are being used for the TFT LCD display. I would have preferred to use an I2C or SPI display, or perhaps even a nextion, but they are either 2 times the price or in the case of the nextion, i would have to learn how to program it first.

I have a total of 8 push buttons or switch control lines, 5 are currently going to be used for things like band change, mode change, tx/rx switching etc. The bandpass and lowpass filters take up another 4 lines each. Yes, this is a 4 band receiver/transceiver. The IF filters will also be switchable between 2 filters, one for SSB and the other a narrow CW filter.

7 of the analog pins will be used to control an attenuator that will give the radio between 0 and -31db of attenuation and finally, we have a rotary encoder for the VFO a keyboard and real time clock. I plan to incorporate my arduino logging software into the radio to have everything in the one box.

The plan at the moment is to have 80, 40, 20 and 15m SSB and CW receiver with a CW transmitter for the same bands, with the option of using the same boards to make a SSB/CW version at a latter date.

Boards were designed and laid out by me and manufactured in China at JLCPCB This is the 2nd time i have used them for prototype boards. The first order was great, nothing wrong with the boards at all. This last lot have a lot of pads with solder mask covering parts of the pads. Nothing that cannot be fixed with a little sandpaper, but very annoying. I think the issue was due to them being rushed because of a public holiday in China. I will give them another go and if the same thing happens I will go back to using PCBWay.

I have been planing ahead for this project for sometime. I had ordered these 40pin ribbon cables on the understanding that it was row compatible for use on LCD displays. Its not, it reverses inside row to outside somehow. Anyway I got Ebay China’d on that part LOL. So I had to make one using using a bit of superglue and some female to female dupont jumpers. Its rather stiff, but will work till a new part arrives.

The new desoldering vacuum made light work of removing the female headers off the Mega, being replaced with pin headers.

 

Board layout is a skill in and of itself. Its nothing easy and something that i struggle with. But i am getting better everytime i do a board. Above you can see i added parts to the other side of the board. LOL this is a first for me and I did not stuff it up. The 5v regulator is orientated the right way. 🙂

The fun part is about to start. And that is developing the firmware to make this thing do what it is meant to do. And no, i will not be sharing my firmware. The main reason is because I do not want to have the issue of supporting it or helping people who cannot get it to work. Most of the code is already on the net. There are a dozen VFO codes already on the web, the Arduino Logger code is on my site, things like push buttons etc are easy enough to do, so anyone who is keen enough can very easily integrate these things together and make a functioning vfo, logging and rig control board.

Here is the PCB layout as it currently stands. All the connectors are 2.54mm JST-XH connectors. The SI5351A is from QRP LABS   I know you can get these also off ebay and simular places and the footprint is probably a little more friendly, but I choose to support QRP LABS when ever i can. They are a good grass roots company that has never let me down.

Gerber Files: Control_Board Use these at your own risk. At the time of posting the board was not 100% checked to see if all functions worked as designed or the layout to be suitable for any particular task. By downloading these files, you agree that you will only use them for your own personal projects and not to sell bare boards, kits or to make a commercial product with them. I call this, the don’t be an arsehole license. If you cannot agree to not be an arsehole, do not download my files.

Facebooktwittergoogle_plusredditpinterestlinkedin