Radio Bebek 1st IF Amp

Radio Bebek First IF Amp

I did a bit more on this today, went through and added in the first IF amp and tested it to ensure it was working. After sorting out some probe issues with my scope, it was all systems go.

Radio Bebek First IF Amp

After working out where the input to the first IF amp was and also buzzing it out back to the first mixer, I fed a 100mv signal into the amp and scoped the output on the other end of the xtal filter to ensure signal was going in and coming out. As you can see from the oscilloscope output above it works.

The blue trace is the 100mv signal from function generator and the yellow trace is the signal on the other side of the xtal filter. Now to build the 2nd IF amp and test it also.

Facebooktwittergoogle_plusredditpinterestlinkedin

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.