Radio Bebek RF PreAmp

Radio Bebek RF Preamp
Powered Up and Testing
100mV in and 500mV out

So the RF preamp has about 5x gain. On 40m its probably not really needed unless there is a lot of loss in the filters. Which in this case might actually be the case as the RF path from the antenna goes through the LPF, into the Relay and then into the BPF. So a little gain ahead of the mixer might be a good thing.

One thing that I left out for now were the back to back clipping diodes. I am only building this as a receiver pretty much to begin with and I am not sure clipping diodes are really necessary. Next I will be working on the LPF and BPF. Need to do some LTSpice here to make sure my values are correct.